Sony CDX-C8850 - Manual (Page 50)

Mounting the unit in a Japanese car
You may not be able to install this unit in some makes ol Japanese cars. In such a case, consult your Sony dealer.
To prevent m alfunction, install only with the supplied screws (§).
Microphone precautions
• This system receives the driver's voice from the microphone. When it is noisy outside your car, shut the
windows. Engine noise may also prevent the system from recognizing the driver’s voice.
• This microphone can receive sound from one direction only (directional microphone), Therefore it is
important to install the microphone properly to ensure the driver's voice will be recei\ ed.
Installing the Microphone
Installation location
• Install the microphone underneath the sun visor in the pushed up position. Note that when the sun visor
is lowered, the microphone will not receive the driver’s voice.
• Install the microphone so that the arrow on the top points toward the driver.
• Consult your dealer when installing in a car equiped with an airbag system or shock absorbing device.
Connecting the microphone
1 Connect the microphone to the MIC jack of the audio equipment. (Refer to the “Installation/
Connectinos" supplied with the unit as well.)
2 Bndle up the connecting cord of the microphone with other connecting cords of the audio
equipment by attaching the supplied cramper Be sure to leave some slack In the connecting
cord between the plug and the cramper.
Secure the microphone's
cord as illustrated.
nstall the microphone'
,o that the arrow on
he top points toward
he driver.
Be sure to leave some
slack in the microphone's
cord between the
microphone and the
holder ® as illustrated.
Secure the microphone's
cord as illustrated.
When you leave your car
Hide the microphone over the sun visor as illustrated to protect the microphone from being stolen.
Secure the wire to the windoW frame so that the
wire does not interfere with driving. Before
attaching the damp dean the surface
thoroughly.