Sony CDX-C8850 - Manual (Page 14)

If interference occurs during FM
reception
If there is interference from neighboring
stations^ follow the steps below and select
"Narrow". If interference is not a problem,
select "Wide" to maximize signal reception
and improve sound quality or "IF Auto "to
switch between "Narrow" and "Wide"
automatically.
1 Press (SHIFT) during FM reception.
2 Press (£) (PLAY MODE) repeatedly until
"IF Auto* appears.
3 Press CD (—►) repeatedly to select
desired setting.
-------- ► IF Auto-------------► Wide ----------
Narrow -e-
4 Press (SHIFT).
2 Press ( LIST ) for two seconds.
F M 1
Ф
3 Enter the characters.
O Rotate the dial clockwise to select the
desired characters.
(A-rB-*C-r-Z-rO-r1-*2-*
— 9—► + —►--
TWl ®
Ш -------
If you rotate the dial counterclockwise,
the characters appear in the reverse
order.
If you want to put a blank space
between characters, select"_" (imder-
bar).
Changing the display item
Each time you press f PSPL/SA). the item
changes as follows;
I---- ► Station name*--------------- ► Frequency —i
I
----------------------- Clock -a--------------------------
1
• /fthe station name is not stored, 'NO Name"
appears in the display for one second.
After if you select the desired item, the display
will be automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.
Tip
The Motion Display mode can be turned off. (See
"Changing the sound and display settings" on
page 25).
I Press (D (—►) after locating the
desired character.
The flashing cursor moves to the next
space.
F M 1 Ф
—
If you press (D (*—), the flashing cursor
moves to the left.
0 Repeat steps O and O to enter the
entire name.
4 To return to normal radio reception,
press ( LIST ) for two seconds.
Tip
To
erase/correct a name, enter (under-bar) for
each character.
14
Storing the station names
—station Memo
You can assign a name to each radio station
and store it in'memory. The name of the
station currently tuned in appears in the
display. You can store up to eight characters
for a station.
Storing the station names
1 Tune in a station whose name you want
to store.
Displaying the station name
Press ( DSPDSA ) during radio reception.
F M 1 Ф
3 NRKISS
Each time you press ( DSPUSA ). the item
changes as follows:
----► Station name*--------► Frequency
■ Clock ■*-
□
If the station name is not stored, "NO
Name" appears in the display for one
second.