Sony CDX-C8850 - Manual (Page 21)

Adjusting the balance
(BAD
You can adjust the sound balance from the left
and right speakers.
1 Press (SOURCE) to select a source (tuner,
CD, or MD).
2 Press (SOUND) repeatedly until "BAL"
appears.
L........//...... R
3 Rotate the dial to adjust the balance.
After three seconds, the display returns to
the normal playback mode.
Adjusting the fader (FAD)
Normally, with the DSP mode on, the volume
of the output sound from the front and rear
speakers is lowered automaHcally to improve
the efficiency of the listening position setting.
If you want to raise the front and rear speaker
volume, adjust the fader.
1 Press t SOURCE ) to select a source (tuner,
CD, or MD).
2 Press (SOUND ) repeatedly to select the
"F" for the front speakers or "R" for the
rear speakers.
F
B............ //.............O
Selecting the cut-off frequency of
the front/rear speakers
1 Press ( SOUND ) for two seconds.
2 Press ( SOUND ~) repeatedly to select “F" or “R.“
3 Press (D (-.).
HPF off
4 Rotate the dial to select the cut-off
frequency.
off 78 Hz .
t98Hz
99 Hz 125 Hz 157 Hz •
If you want to adjust the volume of the
front or rear speakers at this time, press CD
(<—) and rotate the dial as in step 2 of
"Adjusting the fader (FAD)."
5 Press (SOUND) for two seconds.
When the effect setting is complete, the
normal playback mode appears.
Rotate the dial to adjust the volume of
front/rear speakers..
Decreases speaker volume
Decreases speaker volume
After three seconds, the dismay returns to
the normal playback mode.
21