Sony CDX-C8850 - Manual (Page 25)

Changing the sound and
display settings
The following items can be set:
•Clock (page 7).
• D.Info (Dual Information) - to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
• SA (Spectrum Analyzer) - to change the
display pattern of the equalizer display.
• Amber/Green - to change the illumination
color to amber or green.
• Dimmer - to change the brightness of the
display.
— Select "Auto" to dim the display only
when you turn the lights on.
— Select "on" to dim the display.
— Select "off" to deactivate Dimmer.
• Contrast - to adjust the contrast if the
indications in the display are not
recognizable because of the unit's installed
position.
• Voice guide function for vocalized
comments.
— Select "Voice 1" to minimize the volume
of the guide.
— Select "Voice 2" to increase the volume
than "Voice \."
— Select "Voice 3" to maximize the volume
of the guide.
— Select "Voice off" to deactivate Voice
guide.
• Beep - to turn on or off the beeps.
• RM (Rotary Commander) - to change the
operative direction of the controls of the
rotary commander.
— Select "norm" to use the rotary
commander in the factory-set position.
— Select "rev" when you mount the rotary
commander on the right side of the
steering column.
• M.dspl (Motion Display) - to turn the motion
display to 1, 2, or off.
• English/French - to change the vocalized
comments of the voice guide and the display
language to English or French.
• A.Scrl (Auto Scroll) (page 9, 26).
1 Press (SHIFT •)■
2 Press CD (SET UP) repeatedly until the
desired item appears.
Each time you press (D (SET UP), the item
changes as follows:
Clock —• D.Info* —» SA* —► Amber/Green —>
Dimmer —► Contrast —► Voice* —» Beep —* RM
—► M.dspl —► English/French —► A.Scrl*
* When you have not tune the station or there
is no CD/MD being piayed, these items will
not appear.
Note
The display item will differ depending on the
source.
3 Press CD (— *) to select the desired
setting (for example: on or off).
For the "Contrast" setting, pressing CD
(—►) makes the contrast higher, and
pressing (D (<—) makes the contrast lower.
Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.
Changing the equalizer
display
You can change the equalizer display
according to the music you are listening to.
Selecting the display pattern
1 Press (SOURCE) to select a source (tuner,
CD, or MD).
2 Press (DSPUSA) for two seconds
repeatedly to select the desired display
pattern.
I
SA 1 -p SA 2 -p SA 3 -p SA 4 -p SA 5
—p SA auto —♦ SA off • SA6
25