Sony CDX-C8850 - Manual (Page 30)

1
Press
(SHIFT),
then press ® (PLAY
MODE) for two seconds.
Erasing tracks in a program
3 2
If you have labelled the disc, the bank edit
mode appears. Press ® (PLAY MODE) to
display "P" above.
2
Press ® (•►-) or ® {—►) to select the
track you want to erase.
Track slot number
The track currently registered in slot 6.
3
Press ® (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
- -- P.06
4 7 06^c
4- fcariwt ^^ /ÉhÉi< N ^
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press ®
(PLAY MODE) for two seconds.
6 Press (SHIFT).
Labeling a CD
— Disc Memo (CD unit with the custom file
function)
You can label each disc with a personalized
i\ame. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name (page 31) and select the specific
tracks for playback (page 32).
1
Play the CD and press ( list ) for two
seconds.
C D 2
T
2
Enter the characters.
O Rotate the dial clockwise to select the
desired characters.
( A - * B - > C - * - Z - * 0 - * 1 - » 2 - *
C D 2 ®(??)
If you rotate the dial counterclockwise,
the characters appear in the reverse
order.
If you want to put a blank space
between characters, select (under-
bar).
0 Press ® (—♦) after locating the
desired character.
The flashing cursor moves to the next
space.
C B 2 ®(i'5
T Si________
If you press ® (<—), the flashing cursor
moves to the left.
0 Repeat steps O and 0 to enter the
entire name.
3
To return to normal CD playback mode,
press (IlisT) for two seconds.
Tip
To erase or correct a name enter (under-bar)
for each character.
30