Sony SPP-D900 - Manual (Page 7)

Advanced Features
Speed dialing Speed dialing (continued)
(O
You can dial with a touch of a few keys by storing phone number on
a dialing key.
Storing phone numbers
1
2
Press C pgm ^.
The TALK lamp flashes.
Press (SPEED DIAL).
Press one of the dialing keys (®
to CE>) for the phone number to be
stored.
Enter the phone number you want
to store.
You can enter up to 16 digits,
including a tone and a pause, each
of which is counted as one digit.
Press (PGm.
You hear a long confirmation
beep, and the number is stored.
The TALK lamp goes off.
Notes
• To store the previous number dialed, press REDIAL/
PAUSE directly after step 3. Then go to step 5. If the
number exceeds 16 digits or there is no previous number
dialed, five short error beeps sound and storing is
canceled.
• Do not allow more than 20 seconds to elapse between
each step of the procedure.
• Make sure that RING ON/BATT SAVE switch is set to
RING ON.
Tips
• If you enter a wrong number, start from the beginning.
• You can't receive calls while you're storing numbers.
>
a
<
u
3
n
(D
a
■n
(D
fil
To Store a number to be dialed via Private Branch Exchange (PBX)
Before entering a phone number in Step 4 on the previou.s page, do as
follows;
1
Enter the outside line access digit (e.g. 9).
2 Press C REDIAL/PAUSE ) to enter a pau.se.
To change a stored number
Store a new number, as described on the previous page.
Making calls with speed dialing
1
Press (TALK~) and wait until the TALK lamp lights up.
2
Press (SPEED DIAL).
3
Enter the desired speed dialing number (QD to CD).
The phone number stored in the speed dialing number will be dialed.
Paging
You can page from the ba.se unit to the handset.
0
Press ( PAGE).
The paging signal is heard from the handset.
When you press (
PAGE) for a moment, the
paging signal sounds for one .second. Or, the
paging signal .sounds continuously as long as
you keep pressing (
PAGE).
Note
If a call comes in during paging, paging is canceled.
Advanced Features 17^'^ 18^'“
I
Advanced Features