Compaq 1600XL - Manual (Page 89)

P RESARIO N OTEBOOK M AINTENANCE AND S ERVICE G UIDE 1600XL S ERIES R EMOVAL S EQUENCE 3
Presario 1600XL Series
Model 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143, 1600-XL144,
1600-XL146, 1600-XL147, 1600-XL150 XL156, XL157, XL255, XL256, XL257, and XL258
Service Considerations
Consider the following during the disassembly and assembly of the Notebook:
Tools and Software Requirements
The following items are required to service the computer:
•
Torx T-9 screwdriver
•
5mm nut drivers (for screw locks and standoffs)
•
Small standard screwdriver
Screws
The screws used in the Notebook are not interchangeable. If an incorrect screw is used
during the reassembly process, it can damage the unit. Compaq strongly recommends that
all screws removed during disassembly be kept with the part that was removed, then
returned to their proper locations.
Important: As each subassembly is removed from the Notebook, place it away from the
work area to prevent damage.