Sony TC-WR550Z - Manual (Page 16)

Advanced Recording Operations
Inserting a Blank Space During
Recording (Record Muting)
You can insert a blank space of 4 seconds between each
track. The blank spaces allow you to locate the start of
specific tracks afterwards using the Multi-AMS
function {see page 8). You can also use this function to
erase unwanted portions on a tape.
REC MUTE O
1 Start recording.
2 FYess REC MUTE O where you want to insert a
blank space.
"REC” flashes in the display and a blank is
recorded on the tape.
After 4 seconds, II lights up and the tape deck
changes to recording pause.
3 Press PAUSE II to resume recording.
'Q' If you want to insert a blank space longer than 4
seconds
Hold down REC MUTE O as long as you want. After 4
seconds, "REC" flashes faster.
When you release REC MUTE O, II lights up and the
tape deck changes to recording pause.
Press PAUSE II to resume recording
Synchro-Recording With a CD
Player Through a Control A1
Cable
(TC-WE805S/WE705S/WE605S only)
By pressing SYNCHRO, you can perform synchro­
recording on your tape deck with a Sony CD player
connected to the CONTROL A1 connector through a
control A1 cable (see page 4). The control A1 cable
supports advanced functions not possible with the
commander-based CD synchro-recording function on
previous models. Further information on the various
operations made possible by a control A1 cable is
provided in the pamphlet attached to this manual.
DIRECTION MODE <3 / O SYNCHRO
(gifaffl ® QCDG)
1 Set the source selector on the amplifier to CD
player.
2 Insert a CD into the CD player.
3 Select the play mode (CONTINUE, SHUFFLE, or
PROGRAM) of the CD player.
4 Insert a cassette into deck B.
5 Select the side(s) to be recorded on.
To record on Set DIRECTION MODE to
Oidv one side —
Both sides cr^or RELAY
Select the side you want to start recording from
on deck B.
To record from Press
The front side 1>
The re\'erse side <3
16