Adding tracks to the end of a program, Q to create another program, Note – Sony TC-WR550Z User Manual
Page 10: Advanced playback operations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Playback Operations
Adding tracks to the end of a program
Press ■ (CLEAR) once, and follow Steps 2 to 5 in
"Creating Your Own Program (RMS Play)" on page 9.
Q To create another program
Press ■ (CLEAR) until the order on the program
returns to 0 and the cursor flashes above track number I
in the display, then follow Steps 2 to 5 on page 9.
You can use your Sony remote to perform RMS
programming
If
vour
Son\'
stereo receiver’s remote
has RMS
buttosTS,
do the
following
steps.
1
Turn on the receiver and press TAPE.
2 Press RMS/START.
3
Press ► or to select the front or reverse side of
the tape, and the number keys and the >10 key to
specify the tracks.
4
Press RMS/START again to start RMS Play.
Note
For more information on the availability of Sony stereo
receiver remotes with RMS capability, contact your
nearest Sonv dealer.
10