Sony CCD-TRV66 - Manual (Page 57)

Changing the MENU settings
POWER
Icon/item Mode Meaning switch
^ WORLD TIME To set the clock to the local time. Turn the SEL/
PUSH EXEC dial to set a time difierence. The CAMERA
clock changes by the time difference you set
here. If you set the time difference to 0, the
clock returns to the originally set time.
BEEP • MELODY To output the melody when you start/stop
recording or when an unusual conditioti occurs
on your camcorder VTR
CAMERA
NORMAL To output the beep sound instead of the
melody
OFF To cancel the melody and beep sound
COMMANDER • ON To activate the Remote Commander supplied VTR
with your camcorder CAMERA
OFF To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR's remote control
DISPLAY • LCD To show the display on the LCD screen and VTR
viewfinder CAMERA
V-OUT/LCD To show the display on the TV screen, LCD
screen and viewfinder
REC LAMP • ON To light up the camera recording lamp at the
front of your camcorder
CAMERA
OFF To turn the camera recording lamp off so that
the subject is not aware of the recording
INDICATOR • BL OFF To turn off the backlight on display window VTR
BL ON To turn on the backlight
CAMERA
■ siMBEii.
Note
If you press DISPLAY with "DISPLAY" set to "V-OUT/LCD" in the MENU settings,
the picture from a TV or VCR will not appear on the LCD screen even when your
camcorder is connected to outputs on the TV or VCR.
Notes on INDICATOR
♦ When you select "BL ON", battery life is reduced by about 10 percent during
recording.
• When you use power sources other than the battery pack, "BL ON" is automatically
selected.
57