Note, Notes on the steadyshot function, Changing the menu settings – Sony CCD-TRV66 User Manual
Page 53: Selecting the mode setting of each item
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the MENU settings
Note
When you let the subject monitor the shot (Mirror mode), the menu display does not
appear.
Menu items are displayed as the following six icons:
CAMERA SET
m
VTR SET
LCD SET
TAPE SET
[SI
SETUP MENU
OTHERS
Selecting the mode setting of each item
• is the factory setting.
Menu items differ according to whether the POWER switch is set to VTR or CAMERA.
POWER
Icon/item
Mode
Meaning
switch
® D ZOOM
• ON
To activate digital zoom. More than 20x to ,260x
zoom is performed digitally (p. 17)
CAMERA
OFF
To prevent the deterioration of the picture quality
16:9WIDE
• OFF
—
CAMERA
CINEMA
To record in the CINEMA mode (p. 30)
16:9FULL
To record in the 16:9FULL mode
STEADYSHOT
• ON
To compensate for camera-shake
CAMERA
OFF
To cancel the SteadyShot function. Natural
pictures are produced when shooting a stationary
object with a tripod.
N.S. LIGHT
• ON
To use the NightShot Light function (p. 20)
CAMERA
OFF
To cancel the NightShot Light function
WIND
• OFF
—
CAMERA
ON
To reduce wind noise when recording in strong
wind
PHOTO
• NORMAL
To activate the normal photo function
CAMERA
FADE
To activate the fade photo function
SHUTTER
To activate the shutter photo function
Notes on the SteadyShot function
•The SteadyShot function will not correct excessive camera-shake.
• Attachment of a conversion lens (not supplied) may influence the SteadyShot
function.
• SteadyShot does not operate in the 16:9FULL mode. If you set STEADYSHOT to ON
in the MENU settings, the *0” indicator flashes.
53