Checking the recording, End search / editsearch / rec review, End search – Sony CCD-TRV66 User Manual

Page 22: Note, Editsearch, Rec review, Viewing the recording on tv

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Checking the recording

- END SEARCH / EDITSEARCH / Rec Review

You can use these buttons to check the recorded picture or shoot so that the transition
between the last recorded scene and the next scene you record is smooth.

END SEARCH

You can go to the end of the recorded section after you record.

Press END SEARCH in the standby mode.

The last 5 seconds of the recorded section are played back and playback stops. You can

monitor the sound from the speaker or headphones.

Note

If you start recording after using the end search function, occasionally, the transition
between the last scene you recorded and the next scene may not be smooth.

Once you eject the cassette after you have recorded on the tape

The end search function does not work.

EDITSEARCH

You can search for the next recording start point.

+ ; to go forward
- : to go back

Release EDITSEARCH to stop playback. If you press START/STOP, re-recording begins
from the point you released EDITSEARCH. You cannot monitor the sound.

Rec Review

You can check the last recorded section.

Press the - {©) side of EDITSEARCH momentarily in the standby mode.
The last few seconds of the recorded section are played back. You can monitor the
sound from the speaker or headphones.