Sony HCD-241 - Manual (Page 20)

Designating the Total
Playing Time - Time Edit Playing Repeatedly-
Repeat Play
To play the program
Press t>.
The selections for side A will be played and then the unit
will pause. "B" lights up in the tape side indicator. Set the
tape to the beginning of side B, then press t>- or
li.
The selections for side B will be played.
Note
Playback can be performed when "EDIT' is displayed.
To stop playback
Press ■.
You can play the same program repeatedly as long as you do
not cancel time edit or erase the program.
To cancel time edit
Press CONTINUE and return to the continuous playing
mode.
The program will be erased.
To erase the entire program
Press ■ once during stop; twice during playback.
The program is also erased, when you turn off the unit or
open the disc table.
To include desired selections in the program
1 Make your own program of the desired selections.
See page 17 for instructions.
2 Follow the procedures as shown on the preceding page.
Just designate the length of your tape, and you need not
subtract the playing time of your program. The unit w'ill
place your selections at the beginning of its program and
add other selections to fit the remaining time.
Repeat play allow's you to repeat selections in any play
mode. You can repeat all discs, only specified discs, one
selection, or programmed or reshuffled selections.
iSls:
rr f r r
u U l
1 -■ J
__•-— 0 — - !• ”
1
— “ -
REPEAT
Press REPEAT before or during playback.
B£P€AT
CZD
In continuous mode:
To repeat all selections on a disc (1 DISC mode) or all
selections on all discs (ALL DISCS mode), press REPEAT
so that "REPEAT" appears on the display.
To repeat one selection, press REPEAT so that "REPEAT
1" appears on the display.
In program mode or shuffle mode:
Only the "REPEAT' function is available.
The entire program or all selections shuffled in random
order will be played repeatedly by pressing REPEAT.
To cancel repeat play
Press REPEA"r until "REPEAT" or "REPEAT 1" disappears.
20