If the battery becomes weak during a call, Redialing, To check the phone number before redialing – Sony SPP-SS961 User Manual
Page 15: To erase the last phone number dialed
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If the battery becomes weak during a call
The handset will beep every three seconds and
pack.
For optimum performance, charge the battery for a full 12 hours.
Note that during the first
10 -15
minutes of charging, the phone will be
inactive, i.e., unable to make or receive a call.
After this initial
1 0-1 5
minutes, you
may
be able to use the phone, but
the battery duration will be
very short;
thus it is recommended that
you
fully charge
the battery before next use.
Redialing
1
Press CTALK) and wait until "TALK" appears on the display.
2
Press CREDIAL) to redial the number last dialed.
Note
If the number exceeds 32 digits, five short error beeps will alert you that the
number can't be dialed.
To check the phone number before redialing
While the handset isn't in use, press (
redial
).
The number last dialed is displayed for five seconds.
To dial the number, press 1 TALK) while the number is displayed.
Note
The number will not be displayed if the last dialed number exceeds 32 digits or
if it is erased.
To erase the last phone number dialed
While the handset isn't in use, press (
redial
) twice.
The number will be erased from the memory, and you'll hear a long
confirmation beep.
Basics
1