Step 1: installing the projection tv, Optimum viewing area (horizontal), Preparing for your projection tv – Sony KP-61XBR48 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 1: Installing
the projection TV
To enhance the surround effect, connect the supplied
rear speakers to the REAR SPEAKER OUT terminals on
the projection TV. Use the supplied speaker cords.
Connecting the supplied rear speakers
For the best picture quality, install the projection TV
within the areas shown below.
Optimum viewing area (Horizontal)
Preparing for your projection TV
Before you use your projection TV, adjust convergence.
For the procedure, see "Adjusting convergence
(CONVERGENCE)" on page
16.
Connect one rear speaker to the REAR
SPEAKER OUT R terminal and the other
speaker to the REAR SPEAKER OUT L
terminal.
(Rear of projection TV)
(supplied)
(supplied)
Place the rear speakers as shown below to
obtain optimum surround effect.
If possible, mount the speakers on the wall to the
sides of the viewing area 60-90 cm (2-3 feet) above.
Projection TV
Rear speaker
Projection TV
/
Left rear
speaker
0
Right rear
speaker
Note
• Be sure to match the speaker cord to the terminal colors. If the
cords are reversed, the sound will be distorted.
Getting Started
:-EN