Sony KP-61XBR48 - Manual (Page 14)

step 4: Setting up
the projection TV
automatically
(AUTO SET UP)
For customers who connect a cable box, skip this step
and proceed to "Selecting the cable box output channel
(TV INPUT)" (page 18).
You can sct up your projection TV easily by using
AUTO SET UP feature. It changes the on-screen menu
language and presets all the receivable channels
automatically. To set up the projection TV manually,
see "Changing the menu language" (page 17) "Setting
cable TV on or off" (page 16) and "Presetting channels"
(page 17).
If the projection TV is set to a video input, you cannot
execute AUTO SET UP. Press TV/VIDEO so that a
channel number appears.
VOLUIVIE+
SETUP
1
Press POWER to turn the projection TV on.
3
Press CHANNEL+.
If you prefer Spanish or French to English, you can
change the on-screen menu language. Press
CHANNEL- for Spanish or VOLUME+ for French.
CONTINUE TO
AUTO PROGRAM?
YES
NO :
[CEOn
All of the menus will be set to the factory preset
condition in the selected language.
Press CHANNEL+.
"AUTO PROGRAM" appears on the screen and the
projection TV starts scanning and presetting
channels automatically. When all the receivable
channels are stored, "AUTO PROGRAM"
disappears and the lowest numbered channel is
displayed. If the projection TV receives cable TV
channels, CABLE is set to ON automatically.
Notes
• If more than 90 seconds elapse after you press a button, the
menu disappears automatically.
• In case of using the AUX connector, press the ANT/AUX
button on the remote commander first so that "AUX" is
displayed beside the channel number on the screen. Then
follow steps 2 to 4 above to perform AUTO SET UP.
To preview the main functions (DEMO)
Press VOLUME- in step 2. The functions and menus
are displayed one by one. To cancel the DEMO
fuiTction, press VOLUME - again.
2
Press SET UP on the front of the projection
TV.
AUTO SET UP; iCH I
AUTO AJUSTES : CH - i
RÉGLAGE AUTO : fWLVj
DEMO :
Press f^TUP~l to Exit
14 EN Getting Started