No picture (screen not lit), no sound, Poor or no picture (screen lit), good sound, Good picture, no sound – Sony KP-61XBR48 User Manual
Page 45: No color, Dotted lines or stripes, Double images or ghosts, Cannot operate menu, Cannot receive any channels when using cable tv, Remote commander does not operate, Only snow and noise appear on the screen
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
After trying tlie methods below, if the problem persists,
contact your nearest Sony dealer.
No picture (screen not lit), no sound
__^Make sure the power cord is connected
securely.
^Check to see if the TV/VIDEO setting is
correct: when watching TV, set to TV, and
when watching video tapes, set to VIDEO,
(pages 19, 20
)
“►Before you use the projection TV, cable box
or DSS receiver, make sure to press the
corresponding FUNCTION button on the
remote commander, (pages 19, 42)
^Try another channel. It could be station
trouble.
Poor or no picture (screen lit), good sound
^Adjust PICTURE in the VIDEO menu, (page
23)
^Adjust BRIGHTNESS in the VIDEO menu,
(page 23)
“►Adjust the convergence, (page 16)
“►Check antenna/cable connections, (page 6
)
Good picture, no sound
“►Press MUTING so that "MUTING"
disappears from the screen, (page 20
)
■^Check the MTS setting in the AUDIO menu,
(page 26)
^Make sure SPEAKER is set to ALL ON or L/
R OFF in the AUDIO menu, (page 27)
No color
►Adjust COLOR in the VIDEO menu, (page
23)
►Confirm that a black and white program is
not being broadcast.
Dotted lines or stripes
■►•Adjust the antenna.
^Move the projection TV away from noise
sources such as cars, neon signs, and hair
dryers.
Double images or ghosts
^Use a highly directional outdoor antenna
or a cable (when the problem is caused by
reflections from nearby mountains or tall
buildings.)
Cannot operate menu
^If the item you want to choose appears in
grey, you cannot select it. Press TV /VIDEO
correctly.
•►Check the CABLE setting in the SET UP
menu. (page 16)
Cannot receive upper channels (UHF) when
using an antenna
^ Check if CABLE is OFF in the SET UP
menu, (page 16)
^Use AUTO PROGRAM to add receivable
channels that are not presently in the
memory, (page 17)
Cannot receive any channels when using cable
TV
-►Check if CABLE is ON in the SET UP
menu, (page 16)
^Use AUTO PROGRAM to add receivable
channels that are not presently in the
memory, (pages 17)
Remote commander does not operate
^Battery could be weak. Replace the
battery, (page 13)
■► Make sure the projection TV's power cord
is connected securely to wall outlet.
■►Press TV FUNCTION when operating your
projection TV.
“►Are fluorescent lights too close to the
projection TV? Move lights at least 3-4
feet away from the projection TV.
Only snow and noise appear on the screen
^ Check the CABLE setting in the SET UP
menu, (page 16)
^Check the antenna/cable connections,
(page 6)
■►Make sure the channel is broadcasting
programs.
^^-EN Additional Information