Two Brothers Racing Yamaha R6 - Manual (Page 3)

iTBR001-146 2006-07 Yamaha R6 - 3
Fi
gu
re
A
Fi
gur
e B
Fi
gu
re
C
Juice Box Pro
harness
fuel tank
bracket
unplug
Juice Box Pro
connector
stock connector
Juice Box Pro
connector
stock connector
The ignition must be turned OFF before installation.
1 Remove the main seat.
2 Lift the front of the fuel tank up and use something to keep it propped up.
3 Route the Juice Box Pro harness down the left hand side of the bike.
4 Loosen the bolts securing the fuel tank bracket.
5 Route the Juice Box Pro harness underneath the fuel tank bracket as shown in
Figure A.
Once installation is complete, tighten the fuel tank bracket bolts.
6 Unplug the black 9-pin connector from the throttle bodies to the main wiring harness
as shown in Figure B.
7 Attach the Juice Box Pro connectors to the stock connectors as shown in Figure D.
8 Verify these connectors do not interfere with the fuel line when the fuel tank is
lowered back into position.