Two Brothers Racing Honda CBR600 - Manual (Page 4)

iTBR001-175 2007-10 Honda CBR600RR - 4
Fi
gu
re
D
Fi
gu
re
E
Fi
gu
re
F
remove bolt
unplug TPS
9 Attach the Juice Box Pro connectors to the stock injectors and stock wiring harness
as shown in Figure D.
10 Remove the bolt holding the ground wires and bracket for the alternator connectors
to the frame on the left hand side of the bike.
This allows access to the throttle position sensor connector.
11 Unplug the stock wiring harness from the throttle position sensor (TPS) as shown in
Figure F.