Two Brothers Racing Dealer Display - Manual

V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
Parts List
Installation Instructions
2007 Two Brothers Racing
Dealer Display rack
Part #005-D22
Qty. Description
Box 1
8 Metal Frame Shelves
3 White Plastic Shelves
1 Blue Frame (TOP)
Box 2
1 TBR Round Aluminum Sign
1 Blue Frame (BOTTOM)
Open Box 1 and Box 2.
Remove the bottom portion of the blue frame stand from
box 2 and lay the base on the floor.
Remove the top portion of the blue frame stand from
box 1. Insert the four legs into the legs of the bottom
portion of the blue frame from box 2.
Next, place the metal frame racks into the holes along
the sides of the blue frame stand. (The middle portion
has two separate hole locations for your convenience for
different box sizes.)
Gently peel off the clear plastic lining from each of the
three white plastic shelves.
1.
2.
3.
4.
5.
Slide each of the white plastic shelves in between the
blue frame posts and lay them on the metal brackets
into position. These shelves can be used to place
accessories, Power Tips™, or apparel!
Remove the TBR round aluminum sign from its box and
twist it into the threaded hole at the top of the display
rack until it is facing the appropriate direction. Peel off
the clear plastic lining from the sign as well.
Set your TBR exhaust systems into place.
6.
7.
8.
Aluminum sign inside
(Do not throw away)
Double hole locations for Dual or Standard sized boxes.
Warranty
two brothers racing products are intended for closed course competition purposes only, and therefore are sold “as is”
without warranty. two brothers racing specifically disclaims any warranties of merchantability or fitness for a particular
purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use
of these products or parts.