Two Brothers Racing Dealer Floor Display - Manual

V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
Installation Instructions
1. Open box 1 and 2 and confirm you have all the parts
needed to assembly your display.
2. Locate lower stand retainer and plate, set lowerstand
plate over retainer and line-up mounting bolts.
3. Set lower back support on lower stand plate and mount
with 2 8x55mm bolts.
4. Install center support and secure in place with 8x55mm
bolt into lower stand plate and 8x45mm bolt between
back support and center support.
5. Install upper back support onto lower back suport and
secure with 1 8x45mm and 2 8x10mm bolts in sides.
TBR
Dealer Display
Part # 005-D3C