Two Brothers Racing Yamaha Super Tenere/XTZ1200 - Manual

V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
Installation Instructions
1. Make sure the bike is completely cool before starting
the installation. Make sure the bike is secure on a
centerstand or ideally a service lift.
2. Remove OEM muffler side panel by removing the
three bolts.
3. Remove OEM exhaust by removing mounting bolt and
loosening mide tube bracket.
4. Install TBR muffler bracket with OEM mount bolt
and nut, leave loose for now.
5. Loosely attach TBR slip-tube to TBR muffler using
the supplied two-part X-Ring and 6x20mm bolts
with lock washers.
6. Install TBR muffler assembly to motorcycle with
the rubber lined muffler clamp on muffler and
barrel clamp on slip-tube. Muffler clamp attaches to
outside of muffler bount bracket with supplied bolt,
nut and washer.
2012 Yamaha
Super Tenere XTZ1200
Slip-on Exhaust System
Part# 005-31204
IMPORTANT - PLEASE READ CAREFULLY
Warranty
two brothers racing products are intended for closed course competition purposes only, and therefore are sold “as is”
without warranty. two brothers racing specifically disclaims any warranties of merchantability or fitness for a particular
purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use
of these products or parts.
We recommend that this performance part be installed by a qualified motorcycle
technician. If you have any doubts as to your ability to install this performance
part, please consult with your local motorcycle dealer. Read all instructions first
before starting installation. Make sure the motorcycle and exhaust system are
completely cool before starting the installation. Also, make sure the bike is secure
on a centerstand or ideally a service lift during installation. Be sure to save all stock
components for possible use later.
**This product has not been tested with all available accessories and some
items may cause excessive heat. Excessive heat may cause damage to your
vehicle. Two Brothers Racing will not be responsible for damaged parts.