Two Brothers Racing Suzuki GSX-R1000 - Manual (Page 2)

Care & Cleaning / Warranty Instructions (continued)
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place.
For cleaning use a mild spray cleaner. Always apply cleaner or polish
with a soft, clean cloth.
Stainless Header System: Polished stainless steel pipes will
turn a light golden hue after a few heat cycles, this is a normal
characteristic of high quality stainless steel.
Carbon Fiber Mufflers: Always make sure the fiberglass packing
inside is in good condition and not burned out, as exhaust heat
inside an empty canister will deteriorate the Carbon Fiber sleeve.
TBR sells repack kits (TBR part # 005-10038) that include new rivets
and repack material as well as a drill bit (#30), making it easy to do
yourself. Also, NEVER dyno test your bike with carbon fiber mufflers
installed - the intense heat and lack of cooling air can quickly cause
the CF material to burn. Two Brothers Racing does not provide a
warranty for burned carbon fiber.
Aluminum Mufflers: Use an aluminum or mag wheel polish such as
Mother’s to restore the bright finish to factory spec.
Repack all road canisters every 3,000 miles. Part #005-10038
two brothers racing products are intended for closed course competition purposes
only, and therefore are sold “as is” without warranty. Two Brothers Racing specifically
disclaims any warranties of merchantability or fitness for a particular purpose and
disclaims all responsibility for consequential and incidental damages or any other
losses arising from the use of these products or parts.
8. Check alignment of muffler and tighten the 4 6x14mm
socket head cap screws. Then tighten barrel clamp and
lastly tighten muffler mount.
9. Re-install lower fairing.
10. Double check your work to ensure everything is tight and
properly installed.
11. Before you run the bike, clean off all fingerprints and dirt, as
any oily residue will etch the metal and become somewhat
permanent when the system gets hot. Run the bike and
enjoy. It is normal for some white smoke to appear the first
time you start the bike. This is packing/manufacturing oil
from inside the pipe burning off. Check for gaps or leaks.
If you find a leak, a little high temperature silicon sealant
Qty. Description Part Number
1 M-2 Muffler Canister 005-187-206M
1 Slip-On Tube 005-24204S
1 HARDWARE KIT 005-242-3
1 X-Ring Kit 005-7-2-3KIT
1 Barrel Clamp 005-27-71MSH
1 8x45mm Socket Head Flat Screw 005-SHF845B
1 8mm Countersunk AL Washer 005-WA8-B
1 TBR Sticker Kit 015-10212
V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t 2009 Suzuki
GSX-R1000
V.A.L.E.™ Slip-On Exhaust System with M-2 Exhaust Canister
Part # 005-2420406V / 005-2420407V / 005-2420408V