Two Brothers Racing Suzuki GSX-R750 - Manual (Page 2)

V.A.L.E.
V A R I A B L E A X I S L O C K I N G E X H A U S T
TM
Installation Instructions
11. Attach slip-tube to muffl er mounting bracket with 8x16mm
fl ange bolt (use supplied threadlock).
12. Tighten the 4 socket head cap screws at muffl er joint.
13. Tighten barrel clamp.
14. Reinstall rearset assembly. Use the 8mm fl at washer on the
lower bolt. Use supplied threadlock.
15. Push lower fairing back into the push connector and
reinstall the lower fairing mounting bolt.
16. Double check your work to ensure everything is tight
and properly installed.
17. Before you run the bike, clean off all fi ngerprints and
dirt, as any oily residue will etch the metal and become
somewhat permanent when the system gets hot. Run
the bike and enjoy. It is normal for some white smoke to
appear the fi rst time you start the bike. This is packing/
manufacturing oil from inside the pipe burning off.
Check for gaps or leaks. If you fi nd a leak, a little high
temperature silicon sealant should fi x it. After 50 to 100
miles, recheck all fasteners for tightness.
Care & Cleaning / Warranty
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. For cleaning
use a mild spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
Stainless Header System: Polished stainless steel pipes will turn a light golden
hue after a few heat cycles, this is a normal characteristic of high quality
stainless steel.
Carbon Fiber Muffl ers: Always make sure the fi berglass packing inside is in
good condition and not burned out, as exhaust heat inside an empty canister
will deteriorate the Carbon Fiber sleeve. TBR sells repack kits (TBR part # 005-
10038) that include new rivets and repack material as well as a drill bit (#30),
making it easy to do yourself. Also, NEVER dyno test your bike with carbon
fi ber muffl ers installed - the intense heat and lack of cooling air can quickly
cause the CF material to burn. Two Brothers Racing does not provide a warranty
for burned carbon fi ber.
Aluminum Muffl ers: Use an aluminum or mag wheel polish such as Mother’s to
restore the bright fi nish to factory spec.
Two Brothers Racing products are intended for closed course competition purposes only, and
therefore are sold “as is” without warranty. Two Brothers Racing specifically disclaims any
warranties of merchantability or fitness for a particular purpose and disclaims all responsibil-
ity for consequential and incidental damages or any other losses arising from the use of these
products or parts.
(Continued from page 1)
2006 Suzuki
GSX-R750
Exhaust System with M-2H Canister
Part # 005-1480406V / 005-1480407V / 005-1480408V