Two Brothers Racing Polaris Ranger RZR-S - Manual (Page 3)

005-2750406V
V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
2009-10 Polaris
RangeR RZRS 800
V.A.L.E.™ Slip-on Exhaust System with M-7 Aluminum Canister
Part # 005-2750406V
Care & Cleaning
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. Make sure vehicle is completely cool before maintenance.
Stainless Header System: Polished stainless steel pipes will turn a light golden hue after a few heat cycles, this is a normal characteristic of high quality stainless steel. Clean using a
mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
Titanium Header System: Polished titanium pipes will experience color shift ranging from deep blue/purple through amber after a few heat cycles. This is a normal characteristic of high
quality titanium. Clean using a mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
Polished Aluminum Canisters: Use an aluminum or mag wheel polish to restore the bright finish to factory spec.
Brushed Aluminum Canisters: Clean using a mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
Carbon Fiber Canisters: Clean using a mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth. Always make sure the fiberglass packing inside is in good
condition and not burned out, as exhaust heat inside an empty canister will deteriorate the carbon fiber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include everything you need to easily do it yourself.
Titanium Mufflers: For cleaning use a mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth. Always make sure the fiberglass packing inside is in good
condition and not burned out, as exhaust heat inside an empty canister will deteriorate the carbon fiber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include everything you need to easily do it yourself.
Repack all road canisters at the first signs of packing material deterioration. Part #005-10038
Repack all offroad canisters after every 10 hours of use. Part #005-10038MX
NEVER dyno test your bike with carbon fiber or titanium canisters installed - the intense heat and lack of cooling air can quickly burn through the canister material. Two Brothers Racing
does not provide a warranty for burned canisters.
Qty. Description Part Number
1 Muffler Canister Center 005-27504-206M
1 Slip-tube 005-27504S1
1 Mid-pipe 005-27504S2
1 HARDWARE KIT 005-275-3
2 X-Ring (half) 005-7-2-3
8 6x20mm Socket Head Cap Screw 005-SH614
11 M6 Split Lock Washer 005-WL6
1 RZR Muffler Support Bracket 005-275B
1 Barrel Clamp 005-27-64MSH
1 5mm Long Handle Ball end hex key 005-9-18610
1 T20 Torx Screw Wrench 005-9-15820
1 TBR Sticker Kit 015-10212
1 USFS Approved Spark Arrestor (installed) 005-106S