Two Brothers Racing 2008 Kawasaki Teryx 750 - Manual

V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified motorcycle technician.
If you have any doubts as to your ability to install this performance part, please consult with
your local motorcycle dealer. Read all instructions first before starting installation. Make sure
the UTV and exhaust system are completely cool before starting the installation. Be sure to
save all stock components for possible use later.
Installation Instructions
Parts List
2008 Kawasaki
Teryx 750
V.A.L.E.™ Complete DUAL Exhaust System with M-7 Canisters
Part # 005-2240106D
1. Make sure the UTV is completely cool before starting the instal-
lation. Make sure the UTV is secure with the parking brake set.
2. Remove bed from unit by removing pins, frame mounts and
wires. Get a second person to help lift bed assembly off the
vehicle.
3. Remove heat-shield.
4. Remove driver and passenger seats.
5. Remove engine upper covers by removing the quick rivets with
a flat screwdriver and screws with Phillips screw driver.
6. Remove center cover by removing the quick rivets with
a screwdriver.
7. Remove seat lower cover by removing the quick rivets and
screws attaching it to the frame.
8. Remove lower left seat plate to access the front header flange nuts.
9. Remove engine bottom guard by removing (10) engine guard
bolts from underneath of vehicle.
10. Remove OEM muffler and header pipes.
NOTE: Instructions continued on Page 2...
Qty. Description Part Number
1 Left Muffler Canister M-7 005-224-206ML
1 Right Muffler Canister M-7 005-224-206MR
1 Rear Header 005-22401H-R
1 Front Header Assembly #1 005-22401H-F1
1 Front Header Assembly #2 005-22401H-F2
4 Heavy Duty Muffler Clamp 005-2C4
1 HARDWARE KIT 005-224-3C
2 Header Collar Long 005-224-17L
2 Steel Header Flange 005-224-15S
2 X-Lite V.A.L.E Retaining Ring 005-7-2-2
3 80mm Spring 005-S-80
2 Billet Bolt-on Muffler Mount (Front) 005-224B
2 Billet Bolt-on Muffler Mount (Back w/ radius) 005-188B
10 8x25mm Socket Head Cap Screws 005-SH825
14 M8 Split High Collar Lock Washers 005-WL8
8 M6 Split High Collar Washers 005-WL6
4 8x1.25mm Pitch Metal Locking Flange Nuts 005-FNL8
2 8mm Flange Nuts 005-FN8
4 8mm Large Flat Washers 005-WO8
4 8x20mm Socket Head Cap Screws 005-SH820
2 Spark Arrester Screen (Installed) 005-106S
8 6x14mm Socket Head Cap Screws 005-SH614
1 14” Tube with Brackets 005-22401B
2 Needle Shim 005-224NS
1 #150 Main Jet 005-224MJ150
1 #145 Main Jet 005-224MJ145
1 5mm Long Handle Ball end hex key 005-9-18610
1 Permatex High Strength Threadlock 031-P09179
1 TBR Logo Decal Kit 015-10212