Two Brothers Racing Honda VFR1200F - Manual

V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
Parts List
IMPORTANT - PLEASE READ CAREFULLY
This exhaust system has not been tested with aftermarket or OEM accessories and
is not designed to work with them. (i.e. hard bags/ centerstand/ lisc. plate frames)
We recommend that this performance part be installed by a qualified motorcycle
technician. If you have any doubts as to your ability to install this performance
part, please consult with your local motorcycle dealer. Read all instructions first
before starting installation. Make sure the motorcycle and exhaust system are
completely cool before starting the installation. Also, make sure the bike is secure
on a centerstand or ideally a service lift during installation. Be sure to save all
stock components for possible use later.
Installation Instructions
6. Remove OEM muffler assembly.
7. Loosely attach the V.A.L.E. TM muffler to the stainless steel
V.A.L.E. TM connector tube using the supplied 6x20mm
socket head cap screws and 6mm split washers.
8. Slide barrel clamp on end of TBR slip-tube and install
loosely on motorcycle.
1. Make sure the bike is completely cool before starting the
installation. Make sure the bike is secure on its sidestand
or ideally a service lift.
2. Remove the main seat assembly.
3. Remove right side rear cover by removing the 2 bolts
from the top and the push pin from the lower, pull
outward.
4. Rotate servo wheel (by hand) to remove tension from
cable and remove cable from servo. Be gentle so
damage does not occur to internal gears of servo.
5. Rotate servo back to its original location.
2010 Honda
VFR1200F
V.A.L.E.™ Slip-on Exhaust System with M-2/M-5 Canister
Part # 005-2870406V / 005-2870407V / 005-2870408V / 005-2870419V / 005-2870420V
Muffler Inlet
X-Lite™ Ring
Slip Tube
V.A.L.E.™ Assembly Detail
Qty. Description Part Number
1 M-2/5 Muffler Canister Varies
1 Slip-On Tube Assembly 005-28704S
1 HARDWARE KIT 005-287-3
1 X-Ring Kit 005-7-2-3KIT
1 Canister Clamp Varies
1 Barrel Clamp 005-27-61MSH
1 TBR Sticker Kit 015-10212