Casio Cassiopeia BE-300 - Manual (Page 39)

39
8. Tap [Yes] to start the restore operation.
9. In response to the “Restore complete” message that appears after restoration is
complete, tap [OK].
• This automatically resets the CASSIOPEIA, so wait a few moments until it starts up.
Restoring Factory Defaults
You can use the procedure below to restore the CASSIOPEIA to its factory defaults in
the following cases.
• When the procedures under “To reset your CASSIOPEIA” on page 34 and “What to do
if resetting does not solve the problem” on page 35 do not restore normal operation
• When you forget your CASSIOPEIA’s password.
• When you want to clear all CASSIOPEIA data and settings before selling it or
transferring it to another person
To restore your CASSIOPEIA to its factory defaults
1. Connect the AC adapter to the CASSIOPEIA.
2. Press the [Power] button.
3. While holding down the [OK] button, use the stylus to press the [Reset] button.
• This enters the Safe Mode.
4. Tap the [OK] button.
• This displays the touch screen calibration screen. Follow the instructions on the
display to calibrate the touch screen.
• The following screen appears after you finish touch screen calibration.