Casio Cassiopeia BE-300 - Manual (Page 14)

14
Getting Ready
Initial Setup
After you first unpack your CASSIOPEIA, perform the following initial setup
procedure before using it for the first time.
1. Use the AC adapter to charge the battery pack.
Important
• Make sure you charge the battery pack before using your CASSIOPEIA for the first
time. The CASSIOPEIA will not work until you charge its battery pack.
2. While holding down the [Power] button, use the stylus to press the [Reset] button.
• This displays the initialization startup screen. After a short while, the touch screen
calibration screen appears.
3. Follow the instructions that appear on the screen to set up your CASSIOPEIA.
4. The Top Menu appears on the screen after setup is complete.
• You can later change the settings you make with this procedure if you want. See the
separate CASSIOPEIA User’s Guide for more information.
• See “Where to go for information...” on page 15 of this manual for information about
where you should go to find out about the features and functions of your
CASSIOPEIA.
• Be sure to press the [Power] button to turn off power after you are finished using
your CASSIOPEIA.
Important
• If the touch panel does not respond when you tap it or if nothing appears on the
display, try performing a reset (page 34).