Two Brothers Racing Can-Am Commander - Manual (Page 2)

13. Attach OEM springs joining the OEM header to TBR muffler
assembly.
14. Double check your work and make sure all bolts are
tightened and the exhaust is aligned correctly.
15. Before you run the ATV, clean off all fingerprints and
dirt, as any oily residue will etch the metal and become
somewhat permanent when the system gets hot. Run
the ATV and enjoy. It is normal for some white smoke to
appear the first time you start the ATV. This is packing/
manufacturing oil from inside the pipe burning off.
Check for gaps or leaks. If you find a leak, a little high
temperature silicon sealant should fix it. After 50 to 100
miles, recheck all fasteners for tightness.
Care & Cleaning
Installation Instructions
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. Make sure vehicle is completely cool before maintenance.
Stainless Header System: Polished stainless steel pipes will turn a light golden hue after a few heat cycles, this is a normal characteristic of high quality stainless steel. Clean using a
mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
Titanium Header System: Polished titanium pipes will experience color shift ranging from deep blue/purple through amber after a few heat cycles. This is a normal characteristic of high
quality titanium. Clean using a mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
Polished Aluminum Canisters: Use an aluminum or mag wheel polish to restore the bright finish to factory spec.
Brushed Aluminum Canisters: Clean using a mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
Carbon Fiber Canisters: Clean using a mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth. Always make sure the fiberglass packing inside is in good
condition and not burned out, as exhaust heat inside an empty canister will deteriorate the carbon fiber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include everything you need to easily do it yourself.
Titanium Mufflers: For cleaning use a mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth. Always make sure the fiberglass packing inside is in good
condition and not burned out, as exhaust heat inside an empty canister will deteriorate the carbon fiber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include everything you need to easily do it yourself.
Repack all road canisters every 3,000 miles. Part #005-10038
Repack all offroad canisters after every 10 hours of use. Part #005-10038MX
NEVER dyno test your bike with carbon fiber or titanium canisters installed - the intense heat and lack of cooling air can quickly burn through the canister material. Two Brothers Racing
does not provide a warranty for burned canisters.
V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
2011 Can-am
Commander
V.A.L.E.™ Slip-on Exhaust System with M-7 Aluminum Canister
Part # 005-2960406V
Parts List
Qty. Description Part Number
1 Muffler Canister M-7 Aluminum 005-296-206M
1 Stainless Steel S-Bend Slip-On 005-29604S
1 HARDWARE KIT 005-296-3
1 X-Ring Kit 005-7-2-3KIT
1 Muffler bracket 005-296-B
2 8mm Flange locking nut 005-FLN8
2 8x20mm Socket Head Flange Bolt 005-FB820
1 TBR Sticker Kit 015-10212
11. Loosely attach to muffler and install slip-on pipe.
12. Make adjustments and securely tighten X-Ring bolts.