Taylor-Wharton High Capacity GST Storage Tanks - Manual (Page 31)

31
RECOMMENDED TOOLS, EQUIPMENT, AND MATERIALS
Components in the "Reference" column are provided to indicate where various tools,
equipment, and material are used. For locations of various suppliers listed, refer to the Address List
section.
REFERENCE DESCRIPTION PART NUMBER SOURCE
All Hand Valves Preformed Packing - Valve Manufacture
Liquid Level Gauge Pointer Puller - ITT Barton
Vacuum Gauge Tube Krylon Crystal Clear Coating
Vacuum Gauge
Liquid High Vacuum Sealant 4oz.
Epoxy
1301
TV-4A, VT-6
4036
A-12
Borden
Teledyne Hastings-Raydist
Airserco Mfg. Co.
Armstrong Prod.
Vacuum Jacket Relief Device Celevacene Grease
Chlorothene VG
-
-
Consolidated Vacuum Corp.
Dow Chemical Co.
REPLACEMENT PARTS
Order replacement parts from Taylor-Wharton, Theodore, Alabama or the prime
manufacturer. All replacement parts must be cleaned for oxygen service before installation on the
tank. If ordering from the prime manufacturer, provide the Taylor-Wharton part number and all
identifying information with part being serviced. Refer to each tank’s Flow Diagram.