10 j, 10 f – Samson DOUBLE BRAID Class II Eye Splice Modified for TS-II Turbo User Manual
Page 7
PAGE 7 OF 8
SamsonRope.com
| Tel
+1.360.384.4669
Double Braid Class II Eye Splice Modified for TS-II Turbo
S A M S O N S P L I C I N G I N S T R U C T I O N S
Milk DC Gard cover down from
eye the toward working end.
Tape 6 inches tightly at the throat of splice and 12 inches at base of DC Gard cover.
Seize twine over taped area.
See page 189 for more information on seizing.
10
G
10
H
10
I
Milk down
6"
12"
Apply two-part urethane over seized area.
10
J
Finished seizing
Finished seizing
Finished splice
Begin tucking DC Gard strand groups over 2 strands and under 3 strands (1 tuck) and
complete 4 tucks. Bury the remaining length of strand groups between DC Gard cover and
rope a minimum of 1/2 a fid length, trim DC Gard strand group flush with cover. Turn rope over
and repeat for the remaining strand group.
10
F
1/2 fid length
Trim
- PowerBrite Pro7 (16 pages)
- Pro Rack-Mount Power Distribution PB15 (16 pages)
- S. phantom S Class (32 pages)
- C03 (8 pages)
- 3-STRAND Class I Eye Splice (1 page)
- 3-STRAND Class I Long Splice (2 pages)
- 3-STRAND Class I Rope-to-Chain Splice (2 pages)
- 8-STRAND Class I End-for-End Splice (3 pages)
- 8-STRAND Class I Eye Splice (3 pages)
- 8-STRAND Class II End-for-End Splice (3 pages)
- 8-STRAND Class II Eye Splice (3 pages)
- 8x3-STRAND Class II End-for-End Splice (3 pages)
- 8x3-STRAND Class II Eye Splice (3 pages)
- 12-STRAND Class I End-for-End Splice (2 pages)
- 12-STRAND Class I Eye-and-Eye Tail Splice (3 pages)
- 12-STRAND Class I Eye Splice (2 pages)
- 12-STRAND Class I Eye Splice Modified for Quik-Splice (2 pages)
- 12-STRAND Class I Whoopie Sling Modified for Tenex and Tenex-TEC (2 pages)
- 12-STRAND Class II End-for-End Splice (2 pages)
- 12-STRAND Class II End-for-End Splice Modified for Dirty, Used Rope (4 pages)
- 12-STRAND Class II Eye Splice (2 pages)
- 12-STRAND Class II Tuck-Bury End-for-End Splice (3 pages)
- 12-STRAND Class II Tuck-Bury Eye Splice Modified for HMPE (3 pages)
- 12-STRAND Class II Tuck-Bury Eye Splice Modified for Saturn-12 (3 pages)
- 12-STRAND Class II Whoopie Sling Modified for AmSteel and AmSteel-Blue (2 pages)
- 16-STRAND Class I Eye Splice (3 pages)
- DOUBLE BRAID Class I Back Splice (2 pages)
- DOUBLE BRAID Class I End-for-End Splice (4 pages)
- DOUBLE BRAID Class I Eye Splice (4 pages)
- DOUBLE BRAID Class I Eye Splice Modified for Used Rope (4 pages)
- DOUBLE BRAID Class II End-for-End Splice (2 pages)
- DOUBLE BRAID Class II End-for-End Splice Modified for Turbo-37 (4 pages)
- DOUBLE BRAID Class II Eye Splice (3 pages)
- DOUBLE BRAID Class II Eye Splice Modified for TS-II and TS-II Premium (5 pages)
- DOUBLE BRAID Class II Eye Splice Modified for Turbo-37 (5 pages)
- DOUBLE BRAID Class II Tips for Stripping the Cover (4 pages)
- DOUBLE BRAID Special Tips for Splicing Double Braid (1 page)
- DOUBLE BRAID Special Tips for Splicing Double Braid Used Rope (1 page)
- ROUND PLAIT Class I End-for-End Splice (2 pages)
- ROUND PLAIT Class I Eye Splice (3 pages)
- MISCELLANEOUS Lock Stitching, Whipping, and Seizing Procedures (2 pages)
- MISCELLANEOUS Smooth Ice/Flavored Ice Cover Installation (3 pages)
- MISCELLANEOUS Tools Required for Splicing (2 pages)