Samson DOUBLE BRAID Class II Eye Splice Modified for TS-II Turbo User Manual
Page 5
7
step
PAGE 5 OF 8
SamsonRope.com
| Tel
+1.360.384.4669
Double Braid Class II Eye Splice Modified for TS-II Turbo
S A M S O N S P L I C I N G I N S T R U C T I O N S
Working from the eye towards Mark 4,
perform 5 tucks of the cover strands in the
same alternating pattern; over 1 and under
4, over 1, under 5. The 2 groups of cover
strands should meet near the point where
the cover was initially cut, 2 fid lengths from
Mark 3, and 1-1/2 fid lengths from Mark 4.
W e aV I n g C o V e r g r o u p I n g s : e y e e n D
t r I M I n g b a C k ta p e D ta I l s
Weave strand groupings
under core picks
Alternate 4
and 5 Picks
4 picks
4 picks
5 picks
5 picks
8
step
Cut back the cover tails leaving a 1/2 fid length of tail
exposed and arrange them so they lay as close to the
body of the rope as possible. Tape them down.
Tape over the exposed tails with enough tape to adequately
cover the tails, plus an extra 1/2 fid on each side.
ta p I n g ta I l s
9
step
Approximately 1-1/2 fids
Approximately 2 fids
Cut back cover tails
Tape with black electrical tape
- PowerBrite Pro7 (16 pages)
- Pro Rack-Mount Power Distribution PB15 (16 pages)
- S. phantom S Class (32 pages)
- C03 (8 pages)
- 3-STRAND Class I Eye Splice (1 page)
- 3-STRAND Class I Long Splice (2 pages)
- 3-STRAND Class I Rope-to-Chain Splice (2 pages)
- 8-STRAND Class I End-for-End Splice (3 pages)
- 8-STRAND Class I Eye Splice (3 pages)
- 8-STRAND Class II End-for-End Splice (3 pages)
- 8-STRAND Class II Eye Splice (3 pages)
- 8x3-STRAND Class II End-for-End Splice (3 pages)
- 8x3-STRAND Class II Eye Splice (3 pages)
- 12-STRAND Class I End-for-End Splice (2 pages)
- 12-STRAND Class I Eye-and-Eye Tail Splice (3 pages)
- 12-STRAND Class I Eye Splice (2 pages)
- 12-STRAND Class I Eye Splice Modified for Quik-Splice (2 pages)
- 12-STRAND Class I Whoopie Sling Modified for Tenex and Tenex-TEC (2 pages)
- 12-STRAND Class II End-for-End Splice (2 pages)
- 12-STRAND Class II End-for-End Splice Modified for Dirty, Used Rope (4 pages)
- 12-STRAND Class II Eye Splice (2 pages)
- 12-STRAND Class II Tuck-Bury End-for-End Splice (3 pages)
- 12-STRAND Class II Tuck-Bury Eye Splice Modified for HMPE (3 pages)
- 12-STRAND Class II Tuck-Bury Eye Splice Modified for Saturn-12 (3 pages)
- 12-STRAND Class II Whoopie Sling Modified for AmSteel and AmSteel-Blue (2 pages)
- 16-STRAND Class I Eye Splice (3 pages)
- DOUBLE BRAID Class I Back Splice (2 pages)
- DOUBLE BRAID Class I End-for-End Splice (4 pages)
- DOUBLE BRAID Class I Eye Splice (4 pages)
- DOUBLE BRAID Class I Eye Splice Modified for Used Rope (4 pages)
- DOUBLE BRAID Class II End-for-End Splice (2 pages)
- DOUBLE BRAID Class II End-for-End Splice Modified for Turbo-37 (4 pages)
- DOUBLE BRAID Class II Eye Splice (3 pages)
- DOUBLE BRAID Class II Eye Splice Modified for TS-II and TS-II Premium (5 pages)
- DOUBLE BRAID Class II Eye Splice Modified for Turbo-37 (5 pages)
- DOUBLE BRAID Class II Tips for Stripping the Cover (4 pages)
- DOUBLE BRAID Special Tips for Splicing Double Braid (1 page)
- DOUBLE BRAID Special Tips for Splicing Double Braid Used Rope (1 page)
- ROUND PLAIT Class I End-for-End Splice (2 pages)
- ROUND PLAIT Class I Eye Splice (3 pages)
- MISCELLANEOUS Lock Stitching, Whipping, and Seizing Procedures (2 pages)
- MISCELLANEOUS Smooth Ice/Flavored Ice Cover Installation (3 pages)
- MISCELLANEOUS Tools Required for Splicing (2 pages)