Canon EOS 20D - Manual (Page 40)

40
All you do is point the camera and press the shutter button. Everything
is automatic so it is easy to photograph any subject. With nine AF points
to focus the subject, anyone can easily take nice pictures.
1 Set the Mode Dial to <
1>.
s Automatically, the AF mode will be set
to <9>, the drive mode will
be set to , and the metering
mode will be set to .
2 Aim any AF point on the subject.
¡ Out of the nine AF points, the one
covering the closest subject is
selected automatically to achieve
focus.
3 Focus the subject.
¡ Press the shutter button halfway to
focus.
s The AF point which achieves focus
flashes in red briefly. If focus cannot
be achieved, the beeper will sound
and the focus confirmation light <
o>
in the viewfinder will blink.
s If necessary, the built-in flash will pop-
up automatically.
4 Check the display.
s The shutter speed and aperture value
will be set automatically and
displayed in the viewfinder and on the
LCD panel. (
0)
1Using Full Auto
AF point
Shutter speed
Aperture
Focus confirmation light