Canon EOS 20D - Manual (Page 34)

34
Set the date and time as shown below.
1 Select [Date/Time].
¡ Turn the <
5> dial to select [c Date/
Time], then press <
0>.
s The date/time screen will appear.
2 Set the date and time.
¡ Turn the <
5> dial to select the digit,
then press <
0>.
¡ The selection will then shift to the
next item.
3 Set the date display format.
¡ Turn the <
5> dial to set the date
format to [mm/dd/yy], [dd/mm/yy], or
[yy/mm/dd].
4 Press <
0>.
s The date and time will be set and the
menu will reappear.
3
Setting the Date and Time
Each captured image is recorded with the date and time it was taken. If the
date and time are not properly set, the wrong date/time will be recorded.
Make sure you set the date and time correctly.