Crestron electronic infiNET EX CEN-RFGWX-EX - Manual (Page 18)

InfiNET EX™ Gateway Crestron CEN-RFGW-EX
Hardware Hookup
Make the necessary connections as called out in the illustrations that
follow this paragraph. Refer to “Network Wiring” on page 11 before
attaching the 4-position terminal block connector. Apply power after all
connections have been made.
NOTE: Power should be supplied through either the LAN PoE port or
the NET port but not both.
When making connections to the CEN-RFGW-EX, use Crestron power
supplies for Crestron equipment.
Hardware Connections for the CEN-RFGW-EX (Top View)
ANTENNA:
FOR INCLUDED
ANTENNA
Hardware Connections for the CEN-RFGW-EX (Bottom View)
LAN PoE:
10BASE-T /
100BASE-TX
ETHERNET TO LAN
NET:
TO CONTROL SYSTEM
AND OTHER CRESNET
DEVICES
14 • infiNET EX™ Gateway: CEN-RFGW-EX Operations & Installation Guide – DOC. 6706A