Crestron electronic infiNET EX CEN-RFGWX-EX - Manual (Page 11)

Crestron CEN-RFGW-EX infiNET EX™ Gateway
Connectors, Controls & Indicators
# CONNECTORS 1 ,
CONTROLS &
INDICATORS
DESCRIPTION
1 ANTENNA (1) Connection for supplied
antenna
2 PWR LED (1) Green LED, indicates
operating power supplied from
Cresnet network or PoE
3 NET LED (1) Yellow LED, indicates
communication with the
Cresnet system
4 ACTIVITY LED (1) Red LED, indicates
wireless communications
5 ACQUIRE
(Button and LED)
(1) Recessed pushbutton with
red LED, used to set up
connections with wireless
devices
6 SETUP
(Button and LED)
(1) Recessed pushbutton with
red LED, used to set up
connection with the control
system via Cresnet or Ethernet
7 LAN PoE 2, 3, 4
GREEN
LED
YELLOW
LED
PIN 8 PIN 1
(1) 8-wire RJ-45 with two LED
indicators;
10BASE-T/100BASE-TX
Ethernet port, 802.3af Power
over Ethernet compliant;
Green LED indicates link
status;
Yellow LED indicates Ethernet
activity
PIN SIGNAL PIN SIGNAL
1 TX + 5 N/C
2 TX - 6 RC -
3 RC+ 7 N/C
4 N/C 8 N/C
(Continued on following page)
Operations & Installation Guide – DOC. 6706A infiNET EX™ Gateway: CEN-RFGW-EX • 7