Canon MF4370DN - Manual (Page 13)

11
2 Set Up the Machine
7
Adjust the paper guide rail to match the size of
paper.
8
Aligning the protrusions (A) on the both sides of
the dust cover to the guides (B) inside the
machine, set the dust cover.
9
Attach the document feeder tray on the
document feeder.
The default paper size/type is set to and PAPER> in the setting menu. When you load other size
and/or type of paper, change the paper size/type setting
by pressing [Paper Settings]. For details, see
“Introduction of the Machine,” in the e-Manual.
For loading paper in the multi-purpose tray, see
“Introduction of the Machine,” in the e-Manual.
If a printout falls out of the output tray, extend the output
tray extension on the front side of the machine and set
the paper stopper upright. –
–
–