Palm rest: dell latitude d505 service manual, Palm rest – Dell Latitude D505 User Manual

Page 39

Palm Rest

Dell™ Latitude™ D505 Service Manual

CAUTION:

Before performing the following procedures, read the safety instructions in your Product

Information Guide.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching

an unpainted metal surface (such as the back panel) on the computer.

1. Follow the instructions in "

2. Remove the

NOTICE:

You must remove the display assembly before you remove the palm rest; the display hinges pass through

the back of the palm rest.

3. Remove the

4. Remove the three M2.5 x 5-mm screws labeled "circle P" from the top of the palm rest.

5. Remove the M2.5 x 5-mm screw labeled "M2.5x5" from the metal shield.

1 M2.5 x 5-mm screws labeled "circle P" (3) 63PDH
2 top of the palm rest

3 M2.5 x 5-mm screw labeled "M2.5x5"

63PDH

6. Turn over the computer and remove the 13 M2.5 x 8-mm screws.