Dell Vostro 200 (Mid 2007) - Manual (Page 177)

Appendix
177
Boot Up NumLock
Status
Off; On (On by default)
Boot Device Configuration
Removable Device
Priority
Used to set the device priority of removable devices like
USB floppy drives. The items displayed are dynamically
updated according to the removable devices connected.
Hard Disk Boot
Priority
Used to set the device priority of hard drives. The items
displayed are dynamically updated according to the hard
drives detected.
First Boot Device Removable; Hard Disk; CDROM; USB-CDROM; Legacy
LAN; Disabled (Removable by default)
Second Boot Device Removable; Hard Disk; CDROM; USB-CDROM; Legacy
LAN; Disabled (Hard disk by default)
Third Boot Device Removable; Hard Disk; CDROM; USB-CDROM; Legacy
LAN; Disabled (CD-ROM by default)
Boot Other Device Enabled; Disabled (Disabled by default)
Advanced Chipset Features
Init Display First PCI Slot, Onboard, PCIEx (PCI Slot by default)
Video Memory Size 1 MB, 8 MB (8 MB by default)
DVMT Mode FIXED, DVMT (DVMT by default)
DVMT/FIXED Memory
Size
128 MB, 256 MB, MAX (128 MB by default)
Integrated Peripherals
USB Device Setting • USB Controller—Enabled or Disabled (Enabled by
default)
• USB Operation Mode—High Speed; Full/Low Speed
(High Speed by default)
Onboard FDC
Controller
Enabled or Disabled (Enabled by default)
Onboard Audio
Connector
Enabled or Disabled (Enabled by default)
Onboard LAN
Connector
Enabled or Disabled (Enabled by default)
book.book Page 177 Thursday, June 14, 2007 6:23 PM