Display release latch – Dell Inspiron XPS User Manual
Page 26
Back to Contents Page
Display Release Latch
Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the left, right, and center
hinge covers
.
3.
Remove the
keyboard
.
4.
Remove the
display assembly
.
5.
Remove the
keyboard bracket
.
6.
Remove the
palm rest
.
7.
Remove the
speakers
.
8.
Remove the two M2.5 x 6-mm screws from either side of the display release latch.
9.
Pull the display release latch straight up and away from the computer base.
Back to Contents Page
CAUTION:
Before performing the following procedures, read the safety instructions in your Owner's Manual.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1 M2.5 x 6-mm screws (2)
2 display release latch
3 computer base