Step 1 – Dell PowerVault 775N (Rackmount NAS Appliance) User Manual

Page 58

Cabling a SAN-Attached Cluster to the CX600 Storage System

1. Connect cluster node 1 to the SAN.

a. Connect a cable from HBA0 to Fibre Channel switch 0 (sw0).

b. Connect a cable from HBA1 to Fibre Channel switch 1 (sw1).

2. Repeat

for each node.

3. Connect the storage system to the SAN.

a. Connect a cable from Fibre Channel switch 0 (sw0) to SP-A port 0.

b. Connect a cable from Fibre Channel switch 0 (sw0) to SP-A port 2.

c. Connect a cable from Fibre Channel switch 0 (sw0) to SP-B port 1.

d. Connect a cable from Fibre Channel switch 0 (sw0) to SP-B port 3.

e. Connect a cable from Fibre Channel switch 1 (sw1) to SP-A port 1.

f. Connect a cable from Fibre Channel switch 1 (sw1) to SP-A port 3.

g. Connect a cable from Fibre Channel switch 1 (sw1) to SP-B port 0.

h. Connect a cable from Fibre Channel switch 1 (sw1) to SP-B port 2.

Figure 5-5. Cabling a SAN-Attached Cluster to the CX600 SPE