Other documents you may need – Dell PowerVault 775N (Rackmount NAS Appliance) User Manual
Page 21
Ethernet
switch
(optional)
One Ethernet switch for the private network (cluster interconnect).
Ethernet
cables
Standard, crossover, or fiber optic Ethernet cables.
Standard Ethernet cable (not included)
Connects two copper Gigabit Ethernet (1000Base-T) NICs
Connects two Gigabit Ethernet or Fast Ethernet NICs to a switch
Crossover Ethernet cable (not included) connects two Fast Ethernet NICs
Fiber optic Ethernet cable connects Gigabit Ethernet NICs to a switch
for the appropriate connection procedures.
Ethernet
switch
cabling
(optional)
Additional Ethernet cables (not included) may be used to attach to an Ethernet switch for the public network
(client connections) and private network (cluster interconnect)
Other Documents You May Need
The System Information Guide provides important safety and regulatory information. Warranty information may be
included within this document or as a separate document.
The Platform Guide provides information about the platforms that support the NAS cluster configuration.
The Rack Installation Guide included with your rack solution describes how to install your system into a rack.
The Setting Up Your System document provides an overview of initially setting up your system.
The Installation and Troubleshooting Guide describes how to troubleshoot the system and install or replace system
components.
The HBA documentation provides installation instructions for the HBAs.
Systems management software documentation describes the features, requirements, installation, and basic operation of
the software.
Operating system documentation describes how to install (if necessary), configure, and use the operating system
software.
Documentation for any components you purchased separately provides information to configure and install these
options.
The Dell PowerVault tape library documentation provides information for installing, troubleshooting, and upgrading the
tape library.
The RAID documentation provides information for installing and configuring a RAID controller card.
The documentation that came with your storage system.
The EMC PowerPath documentation that came with your HBA kit(s).
Updates are sometimes included with the system to describe changes to the system, software, and/or documentation.
NOTE:
Always read the updates first because they often supersede information in other documents.
Release notes or readme files may be included to provide last-minute updates to the system or documentation, or
advanced technical reference material intended for experienced users or technicians.