Welcome – Vermont Casting 1990 User Manual
Page 2

2
Intrepid II Woodburning Stove
2000966
Welcome
Congratulations on your choice of a Vermont Castings Intrepid II. With this purchase, you made a commitment to make
the hearth a place of warmth, beauty and comfort in your home. At CFM Corporation, we share that joy and appreciation
of the hearth, and we show it in all our cast iron stoves and fireplaces.
As you become acquainted with your new stove, you will find the aesthetic appeal of cast iron is matched only by its
superb capacity to absorb and radiate heat.
Also, CFM Corporation products are among the cleanest burning wood stoves and fireplaces available today. As an
owner of a CFM Corporation stove, you are making a strong statement for pollution-free energy. But clean burning
depends on both the manufacturer and the operator. Please read this manual carefully to understand how to properly
operate your stove.
At CFM Corporation, we are equally committed to your satisfaction as a customer and that is why we maintain an
exclusive network of the finest dealers in the industry. Chosen for their expertise and dedication to customer service,
our dealers are factory-trained and know each CFM Corporation product in detail. Feel free to contact your Authorized
Vermont Castings Dealer anytime you have a question about your stove or its performance.
We have built your Vermont Castings Intrepid II with the utmost care. With normal use and proper care, it will provide
you with many years of service.
This manual contains valuable instructions on the installation and operation of your Vermont Castings stove. You will
also find useful information on assembly and maintenance procedures. We urge you to read the manual thoroughly and
to keep it as a reference.
Sincerely,
All of us at CFM Corporation
This manual describes the installation, operation, and maintenance of the Vermont Castings Intrepid II Model 1990
catalytic-equipped wood burning heater. This heater meets the U.S. Environmental Protection Agency’s emission limits
for wood heaters sold on or after July 1, 1990. Under specific test conditions this heater has been shown to deliver heat
at rates ranging from 8,200 to 26,700 Btu/hr.
The Intrepid II Model 1990 has been tested and is listed by Canadian Standards Association (CSA). The test standards
are ANSI/UL-1482 and ANSI/UL-737 for the United States, and ULC S627 and CAN/CSA-B366.2 for Canada. The Intrepid
II is listed for burning wood only. Do not burn other fuels. The Intrepid II is approved for use in manufactured (mobile)
homes only in the United States, and only when installed with Vermont Castings Mobile Home Kit No. 3248.
Installation or service of this woodburning stove should only be completed by a qualified installer, preferably NFI or
WETT (Canada) certified.
Please read this entire manual before you install and use your new stove. Failure to follow instructions may result in
property damage, bodily injury, or even death.
Save These Instructions for Future Reference