Dell Axim X50 - Manual (Page 51)

Entering Information 51
Editing a Drawing
To edit or format a drawing, you must select it first:
1 Tap and hold the stylus on the drawing until the selection handle appears.
To select multiple drawings, deselect the pen icon and drag to select
the drawings.
2 Tap and hold the selected drawing and tap an editing command on the
pop-up menu.
3 You can cut, copy, and paste selected drawings by tapping and holding
the selected drawing and then tapping an editing command on the
pop-up menu.
You can also tap Edit at the bottom of the screen to select
editing commands.
To resize a drawing, ensure that the Pen icon is not selected, and drag a
selection handle.
Recording a Message
In any program where you can write or draw on the screen, you can also
quickly capture thoughts, reminders, and phone numbers by recording a
message. In Calendar, Tasks, and Contacts, you can include a recording in
the Notes tab. In the Notes program, you can either create a stand-alone
recording or include a recording in a written note. If you want to include the
recording in a note, open the note first. In the Messaging program, you can
add a recording to an e-mail message.
To record a message:
1 Hold the microphone near your mouth or other source of sound.
2 Press and hold the Record button on the side of your device until
it beeps.
3 While holding down the Record button, make your recording.
4 To stop recording, release the Record button.
The device beeps twice. The new recording appears in the note list or
as an embedded icon.
NOTE:
You can also make a recording by tapping the Record icon on the
Recording toolbar.