Dell PowerVault 745N - Manual (Page 8)

Dell PV745N Release Notes
file:///T|/htdocs/stor-sys/spv745N/en/RN/RelNotes.htm[12/5/2012 10:17:35 AM]
Requirements:
· A client system with CD and floppy drive running the Windows 2000 (Professional
or Server Family), Windows 2003, or Windows XP operating system
· 64-MB USB Key included with your NAS system
· Resource CD included with your NAS system
· Internet access.
===============================================================
USB Key Preparation Utility Changed the USB Key Capacity to 55MB
===============================================================
Problem:
After using the Dell PowerVault USB Key Preparation Utility, the USB memory key capacity
changed to 55MB.
Cause:
The USB Key Preparation Utility deletes all existing partitions and data on your USB key and
creates a new 55MB partition containing the reinstallation tools.
Solution:
This is working as designed. The USB memory key shipped with your PowerVault 745N
NAS system should only be use with the reinstallation utility. Other use cases or features
are not supported.
===============================================================
On a System with DRAC 3/XT Menus or Dialogs Boxes May Display Junk Characters
===============================================================
Problem:
When running console redirection from a DRAC3/XT controller, some dialog boxes may display
junk messages.
Cause:
This behavior is encountered if the system’s language is set to non-Unicode language and the
"System Language for the non-Unicode Applications" is set to English.
Solution:
Manually change the "Language for non-Unicode Programs" settings to the same language as the
language use by the server. For example, if the server language is set to Simple Chinese, the
"Language for Non-Unicode Programs" should be set to Simple Chinese as well. Failing to change
the setting can result in display of garbage characters in the UI of the application.
To change the "Language for non-Unicode Programs", perform the following:
1. Go to Start Menu --> Settings --> Control Panel
2. Click on Regional and Language Options
3. Click on the Advanced tab
4. Under Language for non-Unicode programs, select the language version of non-Unicode
programs to match your system language.
5. Click OK.
6. Follow the on-screen instruction. The system will prompt you to reboot, click YES to reboot
and complete the changes.