Dell PowerVault 745N - Manual (Page 4)

Dell PV745N Release Notes
file:///T|/htdocs/stor-sys/spv745N/en/RN/RelNotes.htm[12/5/2012 10:17:35 AM]
program. To disable the BIOS of the PERC RAID controller, use the RAID controller’s BIOS
Configuration Utility. See your PERC documentation for more information
===============================================================
Updated System Depth
===============================================================
Issue:
The system depth documented in your system’s User's Guide is incorrect. The correct depth
of the system with the optional bezel is 63.0 cm (24.8 inches)
===============================================================
Using DSET to Access System Information
===============================================================
DSET is a Dell-developed tool that allows you to access information about system components,
firmware, and driver versions. After every reinstall, a DSET report is automatically generated for
your NAS system.
NOTE: When you update system components such as drivers or firmware, you must generate a
new DSET report to reflect these updates.
To create a DSET report, use a keyboard, monitor, and mouse connected to your NAS system
to log in, or log in remotely using Terminal Services. At the command prompt, enter the following
command:
C:\Program Files\Dell\DSET\bin\systeminfo.bat
===============================================================
Found New Hardware Window Displays During Reinstallation
===============================================================
Problem:
During reinstallation, a Found New Hardware window may display, prompting you to restart
the system.
Cause:
In a previous boot, the operating system disk was upgraded to dynamic.
Solution:
Ignore the window, and select No. The system restarts automatically after it has completed the
reinstallation. Take no other action.
===============================================================
Enabling the Screen Saver with Windows Storage Server 2003
===============================================================
Problem:
In the Microsoft
®
Windows
®
Storage Server 2003 operating system, you cannot enable the screen
saver in the Display Properties dialog of the Control Panel.
Cause:
The screen saver is disabled by default on your NAS system.