Dell PowerVault 745N User Manual
Page 6

Dell PV745N Release Notes
file:///T|/htdocs/stor-sys/spv745N/en/RN/RelNotes.htm[12/5/2012 10:17:35 AM]
Perform a rescan in Array Manager after inserting a new hard drive. The LED status will be updated
correctly.
===============================================================
USB Key Preparation Utility Does Not Recognize The USB Key
===============================================================
Problem:
After inserting a USB key in the system, the Dell PowerVault USB Preparation utility does not
recognize any valid USB keys and does not continue.
Cause:
The utility looks for a valid partition on the USB key before recognizing it as a valid device. This is
done as a precaution so the system does not accidentally delete the wrong USB device.
Solution:
En sure that there is a valid partition on the USB key that spans the entire available space
on the USB key.
===============================================================
Event Log Indicates LDM Service Failure, VDS Provider Failure
===============================================================
Problem:
After a drive failure or when hot-plugging a hard drive in a software RAID NAS system, the
Windows Logical Disk Management service stops responding and the event log reports either an
LDM service failure or a VDS provider failure.
Cause:
This is a problem with the Microsoft LDM service.
Solution:
If you see this behavior, restart the system. For more information about this error, go to the
Microsoft Knowledgebase website.
===============================================================
Selecting the Boot Operating System
===============================================================
Problem:
On software RAID systems, when booting from the pristine operating system (the D: volume),
you may see two options — boot from Windows Server 2003, or boot from the mirror image
of the operating system. After 30 seconds, Windows Server 2003, Standard is automatically chosen..
Cause:
This is caused by the Microsoft LDM service.
Solution:
If this condition occurs, restart the system. For more information about this error, go to the
Microsoft Knowledgebase website.
===============================================================
Rsass.exe Error