Dell XPS 400/Dimension 9150 - Manual (Page 49)

Removing and Installing Parts: Dell XPS 400 Service Manual
file:///T|/htdocs/systems/xps400/sm/parts.htm[8/3/2012 3:11:45 PM]
NOTE: If you are adding a floppy drive, see " Installing a Floppy Drive ."
Removing a Floppy Drive
1. Follow the procedures in " Before You Begin ."
2. Remove the computer cover .
3. Disconnect the power and floppy drive cables from the back of the floppy drive.
4. Disconnect the other end of the floppy-drive cable from the system board
5. Pull the sliding plate to the right and hold in place.
6. Slide the floppy drive out of the floppy drive bay.