Floppy drive – Dell XPS 400/Dimension 9150 User Manual

Page 48

Removing and Installing Parts: Dell XPS 400 Service Manual

file:///T|/htdocs/systems/xps400/sm/parts.htm[8/3/2012 3:11:45 PM]

6. Gently slide the drive into place until you feel a click or feel the drive securely installed.

7. Connect the power and SATA data cables to the drive.

8. Check all connectors to be certain that they are properly cabled and firmly seated.

9. Replace the

NOTICE:

To connect a network cable, first plug the cable into the network port or device and then plug it into the

computer.

10. Connect your computer and devices to electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

Floppy Drive

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before

opening the cover.